Crane maintenance in Dubai is essential because there are chances of some wear and tear when operating with heavy equipment constantly at a construction site. We recommend you conduct a routine maintenance to avoid any extreme wear on the machine.
Below are some tips on maintaining cranes to make them last longer and keep them
Page Content
Inspection
Before you start any kind of operation, we recommend a full inspection of your machines to note down whether there are any loose parts or jammed parts that need oiling or any parts that need replacements because of wear and tear in due time.
Increase Checkup Frequency
If possible, increase the times you carry out maintenance of the cranes. At least do a weekly inspection to see what parts might need a replacement or if certain parts are well lubricated and clean. This is essential to avoid any abrupt machine failure or dysfunction.
Check the Electricals
Start any maintenance round with making sure that the electrical parts of the crane are functioning smoothly. This safety measure is important before starting any operation. Check if your crane has perfect insulation and strong earthing. Get an electrical engineer to make sure that every electrical component is safe for use.
Regular Cleaning
A construction site has a lot of dirt and mud in it. While lifting and moving heavy construction, dust and mud may gather in crevices of the machinery, slowing it down. So regularly check if there is any mud chunks and stones stuck in the Rotex gear. Make sure the controller’s cabin is perfectly clean and functioning. Any lever or button that is jammed needs immediate replacement.
Check the Hydraulic System
If there is any leakage in the hydraulic system, fix it immediately before going ahead with the operation. Along with that, it is also important to check if the lube oil tank level is enough to get you through the day or the operation. Refilling it in the middle of a task is too much of a hassle so check it before starting your day.
After the job is done, make sure to reset the machine to its basic settings and place the attachments to their original position. Check for wear and tear you may not have noticed while working before shutting down for the day. Visit this source to hire all kinds of cranes to suit your construction purpose.
These were some maintenance tips to keep in mind when you are operating a crane on your construction site. Glad we could be helpful!